Every time Oushida sells a hot melt adhesive machine, we will inform customers about the maintenance and upkeep issues of the machine. Regular maintenance of equipment can reduce damage caused by the use of hot melt glue machines.

In the daily operation of the Pur hot melt adhesive machine, there may be varying degrees of wear and tear due to various reasons. For example, changes in the surrounding production environment, especially in environments with high levels of dust, dirt, and mineral powder, if metal powder falls into the hot melt adhesive machine, it will not only accelerate the wear of the machine but also make the bonding process difficult; And it also affects the power supply voltage, current load (pressure), relative motion speed, working temperature, etc. of the Pur hot melt adhesive machine. If regular cleaning and maintenance are not carried out, it is easy to cause damage to the components of the Pur hot melt adhesive machine during operation. Therefore, it is usually recommended to clean the hot melt adhesive machine every 5-7 days. After a maintenance, you will find that the machine is still in operation.

Regular maintenance of hot melt adhesive machine

1. The items that should be maintained every day are:
① Clean the surface of the pressure plate
② Check the power and air source connectors
③ Clean the residual glue on the pressure plate
④ Drain the accumulated water in the air filter
⑤ Check the lifting cylinder.
2. The weekly maintenance items include:
① Check the motor
② Clean the rubber cylinder promptly after use
3. If necessary, the compressed air filter should be replaced.